60*30*10mm Piezo Ceramic Rings for Ultrasonic Welding and Cleaning

Basic Info.

Model NO.	60*30*10mm
Transport Package	Carton
Specification	pzt
Trademark	OKS
Origin	China
HS Code	8543909000
Production Capacity	100000000/Month

Product Description

The principle of the piezoelectric ceramic transducer is that when pressure or tension is applied to the ceramic chip, charges of opposite polarity will be generated at the two ends of the ceramic chip and a current is generated through the circuit. This effect is called the piezoelectric effect. Therefore, in the design of ultrasonic transducers, various factors should be considered, such as acoustic impedance, frequency response, impedance matching, acoustic structure, vibration mode and conversion material, and how to design and coordinate these factors to achieve electro-acoustic conversion. best value. As a kind of energy transmission network, piezoelectric ceramic transducer has the problem of energy conversion efficiency. The conversion efficiency is related to the selection of the transducer material, the form of vibration, the structure of the mechanical vibration system (including the support mechanism) and the operating frequency. Therefore, the problem of the ultrasonic transmitter is solved. There are two materials for piezoelectric ceramic transducers: magnetostrictive metal and piezoelectric ceramics. Piezoelectric ceramic transducer is an electronic ceramic material with piezoelectric characteristics. The main difference from a typical piezoelectric quartz crystal that does not contain ferroelectric components is that the main components of the crystal phase are all ferroelectric crystal grains. Ceramics are polycrystalline aggregates with randomly oriented grains, so the spontaneous polarization vector of each ferroelectric grain is also disoriented. If a transducer made of this piezoelectric ceramic is put into water, then under the action of sound waves, charges will be induced at both ends of the transducer, which is a sound wave receiver. In addition, the piezoelectric effect is reversible. If an alternating electric field is applied to a piezoelectric ceramic sheet, the ceramic sheet will become thinner and thicker from time to time, and it will vibrate and emit sound waves. In order to make the ceramic exhibit macroscopic piezoelectric properties, the piezoelectric ceramic must be polarized in a strong DC electric field after firing, and the end face is subjected to multiple electrodes, so that the polarization vector of the original disordered orientation is preferentially oriented in the direction of the electric field. , The piezoelectric ceramic after polarization treatment will maintain a certain macroscopic residual polarization strength, so that the ceramic has a certain pressure.

spec	Dimension (mm)	Radial frequency (KHz)	Capacitance (pf)	Dielectric dissipation factor tanδ(%)	Electromechanical coupling coefficient (Kr)	Impedance Zr(Ω)	Thickness frequency (KHz))	Mechanical quality factor (Qm)
OKS-25103	Φ25×Φ10×3	66.4	1240±12.5%	≤0.3	≥0.46	≤15	683±5%	800
OKS-225104	Φ25×Φ10×4	66.4	930±12.5%	≤0.3	≥0.46	≤15	512±5%	800
OKS-40155	Φ40×Φ12×5	45.9	2070±12.5%	≤0.3	≥0.46	≤15	410±5%	800
OKS-40155	Φ40×Φ15×5	42.2	1960±12.5%	≤0.3	≥0.46	≤15	323±5%	500
OKS-40176	Φ40×Φ17×6	40.5	1555±12.5%	≤0.3	≥0.46	≤15	341±5%	800
OKS-40205	Φ40×Φ20×5	37.9	1700±12.5%	≤0.3	≥0.47	≤15	410±5%	800
OKS-50206	Φ50×Φ20×6	33.2	2490±12.5%	≤0.3	≥0.46	≤15	341±5%	500
OKS-501765	Φ50×Φ17×6.5	34.8	2430±12.5%	≤0.3	≥0.46	≤15	315±5%	800
OKS-50236	Φ50×Φ23×6	31.2	2340±12.5%	≤0.3	≥0.47	≤15	341±5%	800
OKS-603010	Φ60×Φ30×10	25.3	1922±12.5%	≤0.3	≥0.47	≤18	205±5%	800

Specification	Dimension (mm)	Radial frequency (KHz)	Capacitance (±12.5%)pF	Dielectric dissipation factor tanδ(%)	Impedance (Ω)	Kr	Mechanical quality factor (Qm)
OKS-QXJP3030	Φ30×3.0	66.7	2730	≤0.3	≤15	≥0.55	500
OKS-QXJP3530	Φ35×3.0	63.0	3100	≤0.3	≤15	≥0.55	500
OKS-QXJP3865	Φ38×6.5	59.9	1580	≤0.3	≤15	≥0.55	500
OKS-QXJP4530	Φ45×3.0	50.0	5100	≤0.3	≤15	≥0.55	500
OKS-QXJP4535	Φ45×3.5	50.0	4700	≤0.3	≤15	≥0.55	500
OKS-QXJP5030	Φ50×3.0	46.0	5800	≤0.3	≤15	≥0.55	500
OKS-QXJP5035	Φ50×3.5	46.0	6300	≤0.3	≤15	≥0.55	500
OKS-QXJP5050	Φ50×5.0	46.0	4150	≤0.3	≤15	≥0.55	500
FOR MORE OEM SIZE WELCOME TO ENQUIRE SALERS