Hard Alloy Brazing Copper Silicon Bronze Welding Rings S211

Basic Info.

Model NO.	HZ-S211
Name	Ercusi-a Copper Silicon Welding Rings Brazing Ring
Transport Package	Bags, Cartons
Specification	0.5mm-1.6mm
Trademark	HUAZHONG
Origin	China
HS Code	7408290000
Production Capacity	1000 Tons/Year

Product Description

Company Information:Anhui Huazhong Welding Material Manufacturing Co., Ltd is established in 2004, and located in Hefei--the central City of Anhui Province.We are specialized in manufacturing and producing brazing materials.Our main products include silver-based brazing filler metal, copper-based brazing filler metal, aluminum-based brazing filler metal and associated brazing flux, flux-cored welding wire etc.Our brazing flux products include: silver welding paste, silver welding powder, copper welding paste, copper welding powder, aluminum welding paste, aluminum welding powder, spot welding paste (water), etc. The available shape of brazing alloys are rod, ring, sheet, strip, wire etc. Product Description:Copper-Silicon Filler Metals for Brazing, Welding Wires Rod Rings ERCuSi-A
ERCuSi-A filler metals are copper-base alloys containing approximately 3% silicon.They may also contain small percentages of manganese, tin, or zinc. The are used for gas tungsten and gas metal arc welding of copper-silicon and copper-zinc base metal, to themselves and also to steel.When gas metal arc welding with ERCUSi-A filler metals, it generally is best to keep the weld pool small and the interpass temperature below 150°F (65°C) to minimize hot cracking. The use of narrow weld passes reduces contraction stresses and also permits faster cooling through the hot-short temperature range.When gas tungsten arc welding with ERCuSi-A filler metals, best results are obtained by keeping the weld pool small. Preheating is not required. Welding can be done in all positions, but the flat position is preferred.
The main feature of silicon as the main alloy silicon bronze and its use of bronze.In addition to silicon, industrially applied silicon bronze also contains the main features of less silicon bronze and its main features and uses of manganese, nickel, zinc or other silicon bronze.Silicon has a limited solid solution in copper. The maximum solubility at 852C is 5.3%, and decreases with decreasing temperature, but the age hardening effect is not strong, and generally no intensive heat treatment is performed.Silicon can increase the hardness and strength of copper without reducing its processing plasticity, but significantly reduces the conductivity and thermal conductivity of copper.Silicon bronze has high strength and hardness, good wear resistance, and high elasticity. It is a relatively good elastic material.Mechanics, corrosion resistance, wear resistance and welding performance, no magnetism, no sparks when impact.Wear resistance and high temperature strength are high. Its electrical conductivity is also higher than the general high strength copper alloy.Mainly used to make the main features of various elastic silicon bronze and its use parts and parts working under corrosive conditions and wear parts such as worm gears, worms, gears, village sleeves, brake pins and rods.The aviation industry is mainly used as the main features of elastic silicon bronze and its use parts and high-strength small structural parts, such as combined airspeed meters, lifting speedometers and altimeter supports, rods, shafts, spring rings and so on.The strong cold deformation leads to the anisotropy of the elastic properties of the material. Therefore, when it is used as the main feature of the elastic silicon bronze and its use parts, attention should be paid to the direction of the material and the main characteristics of the silicon bronze and its use parts for low temperature annealing.It is also widely used in the industrial sectors such as machinery, chemicals, petroleum, and ships, and manufactures important parts for the machinery industry and other departments.

Item Name:	Copper-Silicon-Tin Bronze Welding Round Ring/Brazing O Rings /Soldering Ring
Grade:	ISO:CuSi3Mn DIN:SG-CuSi3 AWS5.8:ERCuSi-A EN:SCu6560
Diameter:	0.5mm-1.6mm
Chemical Composition%:	Cu: Rem Zn:Max1 Sn:max1.0 Si:2.8-4.0Pb:Max0.02 Al:Max0.01 Mn:1.5
Melting Range ºC:	910-1025
Packaging Details:	1&2kg/bag 15&20kg/CTN 500kg/wooden box
Price terms:	FOB, CFR, CIF
Payment terms:	T/T, L/C, Western Union, Paypal
Delivery method:	By sea, by air or by express service
Customer design:	We can manufacture in accordance with your samples, drawings or only ideas

More Photos: Our Factory:
RFQ:Q: Are you trading company or manufacturer ?
A: We are manufacturer factory
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.